Table Lift Pictures

Up (back) Table Lift Info Table Lift Pictures Customer Pictures

(press the buttons above to move around the site)

The AFAB Motorcycle Drive on Table Lift.

For a Larger Picture - Click on it!

Frank driving his Lowered Softail up lift ramp.

Lowered Softail with Lift in down position, about 8" high.

Lift raised to first notch, about 15" high.

Lift raised to second notch, about 24" high.

With the AFAB Motorcycle Table Lift you can raise your bike to the right working height for any job.  From a low of 8" to over 30" high.  It is wide (30") enough to drive your bike right on and use standard tie downs to hold it in the E-Z Stand.  It is easy to build and powered by a standard automotive floor jack.

Lift raised to third notch, about 30" high.

Table Lift without a bike on it and floor jack removed.

EZ-Stand unbolted from Lift and set on floor.

EZ-Stand will hold your bike in the shop, trailer or truck bed.

For a Larger Picture - Click on it!

Remove the E-Z Stand and use it to hold your bike on the floor.  Bolt  the E-Z Stand any where to hold you bike, in a trailer or the back of your pickup.  Make additional E-Z Stands to use around the shop.

Greg's Dresser on lift at first notch, about 15" high.

Greg's Dresser on lift at first notch showing floor jack position.

Greg's Dresser on lift at second notch, about 24" high.

Greg's Dresser on lift at third notch, about 30" high.

Strong enough to pick up the heaviest bike.  Wide enough for one person to drive a full dress motorcycle on and secure.   

With the adapter installed you can lift the back with the floor jack.

You can then move it easily around on any hard surface.

Roll it outside and put your bike in the back of a pickup.

Lifts from 8" to over 30" high.

For a Larger Picture - Click on it!

Put the Moving Adapter on the AFAB Table Lift and it is easy to move it from place to place.  Use the floor jack to lift and steer, the front caster make it easy to move in or out of the shop.   Move it over next to the wall and stand on it's side when you don't need it.  Makes a great portable work bench.  

Make sure you check out the pictures from riders who have built the AFAB Table Lift.  They have come up with some really good additions.......Continue

I've seen enough, take me to the How to Order Page.

Up (back) Table Lift Info Table Lift Pictures Customer Pictures

More Information

Phone (775) 588-6074 (8 to 5 PST, M-F only)                    E-Fax (800) 933-0751